Fire Damage Repair in Orem, UT
The cleanup crew hauled out the debris and the smell is finally fading, but your house is still bare studs and subfloor. One free call to Unify Fire Solutions connects you with a licensed and insured independent contractor in Orem who handles the rebuild: framing, wiring, drywall, roofing and the finish work that makes it feel like home again. Dispatch starts while you are still on the line, and the phone is answered 24/7.
- Independent rebuild pros who start from the adjuster's scope
- Line-item estimates in writing before a stud is touched
- Contractors who pull permits and schedule inspections
Getting your home back after the cleanup
Cleanup makes a burned house safe and empty. Repair is the longer stretch that turns it back into a place you can live, and it runs on permits, inspections and an insurance scope that rarely covers everything on the first pass.
Licensed, Insured Independent Pros
Reconstruction is general contracting, and most jurisdictions require a licensed contractor to pull the building permit. The independent contractors we connect you with carry their own license and liability coverage, and electrical and plumbing work goes to licensed trade subcontractors. Ask to see the license and a certificate of insurance before you sign, then verify both.
Line-Item Quotes Up Front
A rebuild should never start on a verbal number. The contractor who walks your property writes a line-item estimate, usually in the same estimating format insurers use, so each line can be held up against the adjuster's scope. If a line is missing, such as drywall texture or an arc-fault breaker, it shows up in black and white.
Rapid Local Dispatch
The line is staffed 24/7, and matching you with a contractor near Orem starts on the first call. A walkthrough often happens the same day or the next, depending on crew availability and distance. That puts a real number on the adjuster's desk sooner.
The Right Reconstruction Tools
Rebuild crews show up with gear a cleanup crew never carries. Expect moisture meters to confirm framing is dry before it gets closed in, framing nailers and joist hangers, laser levels for flattening a sistered floor, and a paint spectrophotometer for blending new walls into the rooms that survived.
Fire Damage Repair, from studs to paint
No two fire losses match, yet the rebuild nearly always runs in one sequence: structure first, then systems, then the shell, then finishes.
The hardest part for most homeowners is not the construction itself. It is knowing what should be on the list. An adjuster writing a scope from the doorway can miss the joist that is charred on its top edge, the circuit that cooked inside a wall two rooms away, or the PEX line that sagged above the ceiling. A contractor who opens wall cavities and probes the lumber catches those items while the walls are still open, not a year later.
The work below is what the independent contractors in our network typically handle on a fire rebuild in Orem. Your job may need some of it or all of it, and the written estimate will spell out which.
Scope and Estimate Review
The adjuster's scope is the starting point, not the final word. The crew checks every line against the real damage and writes a supplement for whatever was left out.
- Line-by-line comparison with the scope of loss
- Photos and measurements behind each supplement
- Meeting the adjuster on site when needed
Joists, Studs and Framing
Charred lumber gets probed and measured, not guessed at. Joists with shallow char are often sistered with new lumber fastened alongside, while deep char or cracked members are cut out and replaced.
- Char depth checks with an awl or probe
- Sistering, new headers and top plates
- Engineer review for load-bearing changes
Electrical and Plumbing Work
Heat travels along a circuit well past the burn line. Insulation on cable can turn brittle or melt inside a wall, so licensed electricians usually replace circuits that ran through the hot zone. PVC softens at modest temperatures and PEX is not built for fire heat, so melted runs get replaced by licensed plumbers.
- New circuits, boxes and panel work
- Melted PEX, PVC and fittings replaced
- Pressure test before the walls close
Drywall, Insulation and Vapor Barriers
Once framing passes inspection, walls go back up in order: insulation, a vapor retarder where code calls for it, then drywall, tape, mud and texture.
- Batts, blown cellulose or foam to code
- Type X board on garage and rated walls
- Texture matched to surviving rooms
Roof Decking, Windows and Doors
When a fire breaks through the roof, it leaves burned rafters, delaminated decking and shingles that will not lie flat again. The contractor replaces decking, underlayment and roofing, then sets new windows and exterior doors where heat cracked glass or warped frames.
- Rafter repair and new roof decking
- Underlayment, flashing and roofing
- Replacement windows and entry doors
Cabinets, Floors and Paint
Finish work is the part you will live with every day. New cabinets, counters and flooring go in, paint is color-matched, and trim is milled or sourced to match the profiles in the rooms that made it through.
- Cabinet and countertop replacement
- Flooring matched or replaced room to room
- Paint, trim and hardware matching
About code upgrades: Pulling a repair permit often brings current-code requirements with it, like interconnected smoke and CO alarms or arc-fault breakers on living-area circuits. Many homeowner policies include ordinance-or-law coverage that may help pay for those upgrades. Limits vary, so ask your adjuster what your policy says before the permit is pulled.
Ready to start the rebuild?
A single free call puts you in touch with an independent rebuild contractor in the Orem area, any hour of the day.
Call +1-833-336-1630Four steps from phone call to punch list
Fire rebuilds take weeks or months, so knowing the order of things up front saves a lot of stress.
- 1
Reach a Live Dispatcher
Tell the dispatcher where cleanup stands, whether an adjuster's scope exists, and which parts of the house burned. The call is free, and the line is open 24/7.
- 2
Your Walkthrough Gets Scheduled
A rebuild contractor in the Orem area is matched to your job and books a walkthrough, often the same day or the next. Timing depends on crew availability and distance.
- 3
Inspection and a Written Estimate
The contractor probes framing, takes moisture readings, opens a few wall cavities to trace wiring, and photographs everything. You get a written, line-item estimate to go over with your adjuster before any work begins.
- 4
Work Done, Then a Walkthrough
Permits are pulled, rough-in inspections pass, and the house is closed in and finished. At the end you walk every room with the contractor and a punch list, and nothing is signed off until each item is done.
How the rebuild went for people who called
The insurance scope only listed drywall and paint over the stove. The contractor pulled the ceiling and found the joists above it charred halfway through. He sistered three of them, sent photos to the adjuster, and the supplement was approved the following week.
The fire stayed in the garage, or so we thought, until the electrician found cooked wiring that ran into the laundry room. Those circuits got rerun, the garage got Type X board, and the inspector passed it on the first visit.
I own a duplex and had tenants waiting to move back in. The contractor pulled the permit, called me after each inspection, and cleared the punch list in a couple of days. My tenants were home sooner than I expected.
My biggest worry was the hallway, where half the oak floor burned and the other half survived. They wove new boards into the old ones, refinished the whole run, and you honestly cannot tell where the fire stopped.
Fire rebuild questions we hear most
How long does it take to rebuild a house after a fire?
A single-room kitchen fire can be rebuilt in a few weeks once the estimate is approved. When the damage spreads to the roof or multiple rooms, plan on several months, since permits, inspections and backordered materials all add time. Ask the contractor for a written schedule with the inspection points marked.
Do I need a building permit to repair fire damage?
In most places, yes, once the work goes beyond cosmetic repairs. New framing, circuits, pipes or roofing nearly always need a permit, with inspections at rough-in and at the end. The licensed contractor normally pulls it, and the inspector's sign-off protects you when you sell or refinance later.
Can charred joists be repaired, or do they have to be replaced?
That comes down to char depth and whether the joist can still carry what it was sized for. Surface char is often sanded or scraped, sealed and left in place, and moderate char is commonly sistered with new lumber. Deep char, cracking or sagging generally means replacement, sometimes with an engineer's letter.
Does all the wiring have to be replaced after a house fire?
Not every wire, though anything that ran through the hot area needs inspection and is commonly replaced. Heat can damage the insulation on a cable inside a wall even where the drywall looks fine. A licensed electrician traces the runs, tests them, and the work is inspected before walls close.
What if the contractor's estimate is higher than the insurance adjuster's?
That is common, and it rarely means anyone is padding the numbers. The contractor writes a supplement that lists the missing items with photos and measurements, and the adjuster reviews it. Many differences come from hidden damage that was found once walls and ceilings were opened.
Who pays for code upgrades when rebuilding after a fire?
Many policies include ordinance-or-law coverage, which may pay some or all of the cost of bringing rebuilt areas up to current code. Limits and terms vary widely, so read your declarations page or ask your adjuster before work starts. Typical items are smoke and CO alarms, arc-fault breakers and updated stair or egress details.
Fire Damage Repair in Orem and surrounding neighborhoods
Calls come in from all over Orem and the surrounding area, from older houses with plaster walls to newer homes with engineered floor joists and PEX manifolds. The dispatcher matches you with an independent contractor who already works in your area and knows the local permit office.
- Kitchen rebuilds
- Garage fires
- Roof and attic losses
- Rental units
- Condos and townhomes
- Small businesses
Zip codes we take calls from include 84097 84058 84059 84057. When the mess is gone and you want your house back, call and a dispatcher starts matching you right away. If the first contractor is not the right fit, call back and we will connect you with another one.
